• WARNING: Ensure the inside of the Pressure King Pro 3L and the inner pot are clean and free from any food debris before starting and NEVER place food or liquid directly into the Pressure King Pro 3L. Always use the inner pot to cook food in. The liquid and ingredients should be between the MAX and MIN marks on the inside of the inner pot.

    Always check the User Manual for guidance on the safe use of your Pressure King Pro before you do any cooking.

    Remember that you will be working with hot liquids and steam, so always ensure that all the safety requirements are fully in place before you start any cooking and please exercise care and caution as you follow the Steps in this guide.

    Always wear oven gloves and an apron to protect against any splashing of hot food and steam.

    Also refer to the Safety information Topics in this guide for information.
  • 1.

    Twist the top handle clockwise and remove the lid.

  • 2.

    Remove the inner pot.

  • 3.

    Fill with the ingredients required for the recipe.

    CAUTION: With cooking ingredients that expand during cooking, we recommend that you only fill the inner pot halfway between the MAX and MIN marks.

  • 4.

    Replace the inner pot.

  • 5.

    Replace the lid (align the arrow on the lid with the arrow on the left handle of the Pressure King Pro 3L), and lock by turning anti-clockwise.

  • 6. Insert the power cord and connect to mains power.
  • 7.

    Turn the pressure release valve to the open position.

  • 8.

    Press the Keep warm/Slow cook button.

  • 9.

    ‘SLO’ will be shown on the display and will begin the cooking cycle.

  • 10.

    Press the + or - to adjust the cooking cycle (which is in 30 minute intervals).

  • 11. When the timer has finished, your Pressure King Pro 3L will ‘BEEP’ and End will be shown on the display.

    Your Pressure King Pro 3L will now start the KEEP WARM function, this will run for a maximum of 24 hours.

  • 12.

    Press the Cancel button to cancel the KEEP WARM function.

  • 13.

    Allow your Pressure King Pro 3L to cool choosing the Quick or Slow release method (see Basic Usage).

  • 14.

    Twist the top handle clockwise and remove the lid.

  • 15.

    Remove the inner pot using oven gloves or a heat proof cloth.

    After using your Pressure King Pro 3L please clean it by following steps in the Care and Maintenance section.